Home Latest SK Hynix Gold P31 SSD review: The first 128-layer NAND drive is fast and affordable too

SK Hynix Gold P31 SSD review: The first 128-layer NAND drive is fast and affordable too

0
SK Hynix Gold P31 SSD review: The first 128-layer NAND drive is fast and affordable too

[ad_1]

The SK Hynix Gold P31 NVMe SSD moves the needle on the industry seismometer just enough to makes this review far easier to write. Two points alter the needle’s path: The P31 is not only the first drive to sport 128-layer TLC NAND, it’s also the first in my experience to feature eco-friendly packaging. Huzzah!

This review is part of our ongoing roundup of the best SSDs. Go there for information on competing products and how we tested them.

Design and specs

While the SK Hynix Gold P31 uses the same 2280 (22 mm wide, 80 mm long) form factor as most SSDs, the similarities stop there. Instead of the usual 96 layers of TLC NAND, the P31’s TLC NAND sports 128. How this translates to “4D,” as the company refers to it in the product brief, rather than 3D, I’m not sure. There’s DRAM cache on board, and NAND is employed as secondary cache, though we were not given the amounts involved. Whatever they are, they’re effective.

Regardless, it’s a first and translates to more memory per chip and lower prices: The 1TB capacity we tested is $135 on Amazon, while the 500GB is $75 on Amazon. There are cheaper drives, you say? Sure, by a little, but read the performance section below.

sk hynix gold p31 ssd 01 inline SK Hynix

SK Hynix’s P31 delivers top-notch performance at a bargain price.

The P31 carries a five-year warranty, a 1.5-million hour-MTBF (Mean Time Before Failure) rating, and 350TBW rating for the 500GB and 750TBW for the 1TB which are more than decent numbers. That info gives us a sunny outlook on the lifespan of the drive, though in truth, SSD failures are almost unheard of in the end-user space these days.

I must once more mention the eco-friendly packaging. In a world where every product seems to add another layer of detritus to landfill, the P31 is a pleasant exception. I won’t talk about e-waste—that would ruin the mood.  

Performance

The 1TB P31 I tested absolutely aced the CrystalDiskMark 6 and AS SSD synthetic benchmarks. It hit nearly the 3.5GBps read and write speeds claimed in the press release. Close enough to call it true, given that our testbed is several generations old.

skh p31 cdm 6 IDG

The SK Hynix P31 is right there with the top dogs in CrystalDiskMark 6. Longer bars are better. 

Though not as fast as Seagate’s FireCuda 520, the P31 held its own in every real-world 48GB transfer except, somewhat oddly, the small file read test. There it proved a half-minute slower than the competition. It struggled on small .jpg files more than most, which could have something to do with the onboard compression algorithms.

skh p31 48gb IDG

Throw out the small file read test, and the P31’s aggregate score would look much, much better. I ran the test an additional five times to confirm the seemingly oddball result. Shorter bars are better.

The P31 redeemed itself with a mighty performance writing our large 450GB file. This is not something users often do, but it is a good test of cache management, and occasionally NAND speed. Notice the rather grim results turned in by the Crucial P5 and Samsung 970 EVO Plus. That’s what happens when you run out of cache. We’ve seen even worse from bargain drives.

[ad_2]

Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here